A Complete Guide to Installing The Triton T90sr Electric Shower!

If you're looking for a new electric shower for your bathroom, Triton T90sr is an excellent choice. This shower is known for its advanced features, high-quality performance, and easy installation. In this guide, we'll take you through the step-by-step process of installing Triton T90sr electric shower, so you can enjoy a relaxing shower in no time.

Before we begin, make sure you have all the necessary tools and materials for the installation. These include a power drill, screwdriver, adjustable wrench, tile drill bit, and silicone sealant. You'll also need to have access to a water supply and electrical circuit.

Step 1: Turn off the Water Supply Before you start the installation, turn off the water supply to your bathroom. This can be done by turning off the main water supply to your house or by shutting off the isolation valve for your bathroom.

Step 2: Prepare the Installation Area Clear the installation area of any debris or obstructions. Remove the old shower unit if necessary, and clean the area where the new shower will be installed. Make sure the wall is flat and level, and check that the electrical supply is safe and secure.

Step 3: Mark the Holes for the Fixing Screws Hold the shower unit against the wall at the desired height and mark the holes for the fixing screws. Use a tile drill bit to make holes in the wall where you have marked.

Step 4: Connect the Water Supply Connect the water supply to the shower unit. Use an adjustable wrench to tighten the connections, making sure they are secure and watertight.

Step 5: Connect the Electrical Supply Connect the electrical supply to the shower unit. Follow the manufacturer's instructions carefully, ensuring that the electrical connections are safe and secure.

Step 6: Install the Shower Head and Hose Attach the shower head and hose to the shower unit. Use an adjustable wrench to tighten the connections, making sure they are secure and watertight.

Step 7: Apply Silicone Sealant Apply silicone sealant around the edges of the shower unit, ensuring a watertight seal. Use a damp cloth to smooth the sealant and remove any excess.

Step 8: Test the Shower Turn on the water supply and test the shower. Check for any leaks or drips and make sure the water flow and temperature are correct.

In conclusion, installing Triton T90sr electric shower is a straightforward process that can be done by most homeowners with basic DIY skills. Follow the step-by-step guide above, and you'll have your new electric shower up and running in no time. If you're unsure about any aspect of the installation, consult a professional plumber or electrician to ensure the job is done safely and correctly.